Setting up a printer can sometimes feel like a small challenge, especially when moving to a new operating system like Windows 11. If you own a Canon G2010 printer and are looking to install its driver on a Windows 11 PC or laptop, you’re in the right place.

In this article, we’ll go step by step through the entire process: from downloading the official Canon driver, to manually installing it, and finally verifying that everything is working correctly. I’ll also include troubleshooting tips, FAQs, and notes for cases where you might run into issues.

So, grab a cup of coffee, and let’s get started!

---

⚙️ Why You Need the Correct Canon Driver

A printer driver is like a translator between your PC and the printer. Without it, Windows doesn’t know how to communicate with the Canon G2010. Using the wrong driver can lead to:

• Printer not detected by your computer.
• Incomplete functionality (e.g., can print but not scan).
• Frequent errors when sending documents to print.
• Compatibility issues with Windows 11.

That’s why downloading the official driver from Canon’s support site is crucial. Don’t rely on third-party websites, as they may provide outdated or even unsafe software.

---

✅ Step 1: Download the Canon G2010 Driver

Let’s begin with downloading the driver.

1. Open any web browser (Google Chrome, Microsoft Edge, or Firefox).
2. In the search bar, type:
   Canon G2010 printer driver download
3. From the search results, click on the official Canon support site (https://in.canon or your regional Canon support portal).
4. On the support page, ensure your printer model Canon G2010 is displayed.
5. Scroll down to the Drivers & Downloads section.
6. Make sure the Operating System is set to Windows 11 (64-bit).
   • If Windows 11 isn’t listed, select Windows 10 (64-bit). These drivers work fine on Windows 11 as well.
7. Click Search or Update, and the driver list will refresh.
8. Find the recommended driver package and click Download.

💡 Tip: Windows 11 is always 64-bit, so you don’t need to worry about choosing between 32-bit and 64-bit options.

---

✅ Step 2: Extract the Driver File

After the download is complete, the driver file will likely be in compressed format.

1. Open the Downloads folder.
2. Right-click on the driver file.
3. Select Extract All or (if you use WinRAR/7-Zip) choose Extract Here.
4. A new folder will be created with the unzipped driver files.

Inside this folder, you’ll find the actual driver files, including important .INF files that Windows will use during manual installation.

---

✅ Step 3: Open Printers & Scanners Settings

Now we’ll start the installation process through Windows settings.

1. Press Windows + S and type Printers & Scanners.
2. Click to open the Printers & Scanners settings window.
3. At the top, click on Add a printer or scanner.
4. Wait a few seconds. If Windows cannot detect the Canon G2010 automatically, don’t worry.
5. Click The printer that I want isn’t listed to proceed with manual setup.

---

✅ Step 4: Add the Printer Manually

When the wizard opens:

1. Select Add a local printer or network printer with manual settings.
2. Click Next.

This ensures we are manually pointing Windows to the driver files you just downloaded and extracted.

---

✅ Step 5: Select the Correct USB Port

This is one of the most important steps.

• If your Canon G2010 is already connected via USB, you should see port options like:
  • USB001 (Virtual Printer Port)
  • USB002, USB003 etc.
• Choose the one that matches your connected printer.
• If you’re unsure, start with USB001.

👉 If the installation doesn’t work, you can retry later with USB002 or another port.

Click Next to continue.

---

✅ Step 6: Install the Driver Using INF File

Now we’ll point Windows directly to the Canon G2010 driver files.

1. On the driver installation screen, click Have Disk.
2. Then click Browse.
3. Navigate to the folder where you extracted the driver files.
4. Double-click the folder until you see files with the .INF extension.
5. Select one .INF file (all are valid options for this printer).
6. Click Open, then OK.

Windows will now recognize the Canon G2010 model from this INF file.

---

✅ Step 7: Finalize the Setup

1. From the list, select Canon G2010 Series.
2. Click Next.
3. You’ll be asked to name the printer. You can keep it as Canon G2010 or give it a custom name.
4. Windows will now install the driver. Wait a few seconds.
5. Once complete, choose whether to share the printer on a network.
   • For personal use, select Do not share this printer.
6. Click Next.

---

✅ Step 8: Verify Installation and Test Printing

Now it’s time to make sure everything is working.

1. Go back to Printers & Scanners settings.
2. Look for Canon G2010 in the list of installed printers.
3. Select it and click Manage → Print Test Page.
4. If the page prints successfully, congratulations 🎉 — your Canon G2010 is ready!

---

🔧 Troubleshooting Common Issues

Even after following the steps, some users may face issues. Here’s how to fix them:

• Printer not detected → Try another USB port or cable.
• Driver not installed → Make sure you extracted the driver ZIP file before browsing for INF.
• No test page output → Uninstall the printer, restart your PC, and try installation again using another port (USB002 or USB003).
• Windows installed a generic driver → Remove the generic driver and reinstall using the official INF.
• Sharing errors → If you need the printer on a network, install it on one PC first, then enable sharing.

---

❓ Frequently Asked Questions

Q1: Does the Canon G2010 work with Windows 11?
Yes. Even if Canon hasn’t listed Windows 11 explicitly, the Windows 10 (64-bit) drivers work perfectly.

Q2: Can I use wireless printing with Canon G2010?
No. The G2010 is a USB-only printer. You’ll need to connect it directly to a PC.

Q3: What if I can’t find INF files?
Make sure the driver file is extracted. If still missing, re-download from the official Canon website.

Q4: Do I need to install scanner drivers separately?
The Canon G2010 includes only printing functionality. For scanning, you’d need a multifunction model (like G3010).

---

🏁 Conclusion

Installing the Canon G2010 driver on Windows 11 may seem intimidating, but it’s actually quite straightforward once you follow the correct steps. By downloading from Canon’s official site, extracting the driver files, and manually pointing Windows to the INF file, you can ensure the printer is fully functional.

Now you can print documents, assignments, or photos without worrying about driver issues. If you face errors, just revisit the troubleshooting section or reinstall with a different port.

---

⚠️ Disclaimer

This tutorial is for educational purposes only. Always download drivers from the official Canon support website: https://in.canon. Do not use third-party driver sites as they may contain outdated or unsafe files.

---

🏷️ Tags & Hashtags

Tags: Canon G2010 driver, Canon printer installation, Windows 11 printer driver, Canon G2010 setup, Canon INF driver

Hashtags: #CanonG2010 #PrinterDriver #Windows11 #PrinterSetup #CanonPrinter

Sneha Rao

Sneha is a hardware reviewer and technology journalist. She has reviewed laptops and desktops for over 6 years, focusing on performance, design, and user experience. Previously working with a consumer tech magazine, she now brings her expertise to in-depth product reviews and comparisons.

Website · More from this author