The Epson M200 is a multifunction printer that supports both printing and scanning. It’s a reliable device, but like any printer, it requires the correct drivers to work smoothly. If you’ve upgraded to Windows 11 and your Epson M200 isn’t working, the reason is most likely missing or incompatible drivers.

The good news? Even if Epson’s website doesn’t explicitly list Windows 11 drivers, the Windows 10 (64-bit) drivers work perfectly fine. In this tutorial, I’ll guide you through the process of downloading, extracting, and installing the Epson M200 printer and scanner drivers manually on your Windows 11 PC or laptop.

We’ll also look at troubleshooting common errors like missing ports, unrecognized devices, or test page failures. By the end, you’ll have your Epson M200 working at 100%.

So let’s dive in step by step!

---

⚙️ Why Correct Drivers Matter

Drivers are the backbone of printer communication. Without them, your PC won’t know how to send commands to your Epson M200. Incorrect drivers can cause:

• Printer not detected.
• Scanning features missing.
• Errors when printing test pages.
• The printer showing up as “Unknown Device.”

That’s why downloading the official Epson M200 drivers is the safest and most reliable method.

---

✅ Step 1: Open Epson’s Official Website

1. Open your preferred browser (Google Chrome, Edge, or Firefox).
2. In the search bar, type:
   Epson M200 printer driver download or visit this link here : https://www.epson.co.in/Support/Printers/All-In-One/M-Series/Epson-M200/s/SPT_C11CC83412#drivers
3. Hit Enter.
4. From the search results, click the official Epson support link (support.epson.net or your regional Epson site).

📌 Always avoid third-party sites — they may provide outdated or unsafe files.

---

✅ Step 2: Select the Right Operating System

Epson’s website may not show Windows 11 drivers. Don’t worry!

• Select Windows 10 64-bit from the dropdown menu.
• Windows 10 drivers work perfectly with Windows 11 since both are 64-bit.

👉 If your PC is very old and you’re unsure of architecture, check it:

1. Press Windows + Pause/Break (or right-click This PC > Properties).
2. Under System Type, you’ll see either 64-bit Operating System or 32-bit Operating System.
3. Windows 11 is always 64-bit, so you’ll almost always need the 64-bit driver.

---

✅ Step 3: Download Printer & Scanner Drivers

The Epson M200 comes with two key drivers:

• Printer Driver – Required for printing.
• Scanner Driver – Required for scanning functions.

Steps:

1. On Epson’s driver page, scroll down to Drivers & Utilities.
2. Click the + to expand the Printer Driver section.
3. Click Download → Accept license agreement → Wait for the file to download.
4. Do the same for the Scanner Driver.

You should now have two files in your Downloads folder.

---

✅ Step 4: Extract the Driver Files

Both files usually come compressed.

1. Go to your Downloads folder.
2. Right-click on the driver file.
3. Select Extract All (or Extract Here if you use WinRAR/7-Zip).
4. A new folder will appear with the unzipped driver files.
5. Repeat the same for the Scanner driver.

---

✅ Step 5: Start Manual Installation

Now that we have the drivers ready, let’s begin installing the printer driver manually.

1. Press Windows + S and type Printers & Scanners.
2. Open the Printers & Scanners settings window.
3. Click Add a Printer or Scanner.
4. Wait a few seconds → Select The printer that I want isn’t listed.
5. Choose Add a local printer or network printer with manual settings → Click Next.

---

✅ Step 6: Choose the Correct USB Port

This step is crucial.

• If your Epson M200 is already connected via USB, look for something like:
  • USB001 / Virtual Printer Port
  • USB002, USB003…
  • Or an HP/Epson named port

👉 If unsure, select USB001.
👉 If that doesn’t work later, you can reinstall using another port.

Click Next to continue.

---

✅ Step 7: Locate the INF Driver File

Now we’ll point Windows to the extracted Epson driver files.

1. Click Have Disk → Browse.
2. Navigate to your Desktop/Downloads → Extracted Epson M200 folder.
3. Look for a file with the extension .INF (this is the driver installer).
4. Select it → Click Open → OK.

Windows will now display the Epson M200 printer model.

---

✅ Step 8: Finish Printer Installation

1. Select Epson M200 Series → Click Next.
2. Assign a printer name (default: Epson M200).
3. Choose whether to share the printer on the network.
   • For home use, select Do Not Share This Printer.
4. Installation will begin. Wait a few seconds.
5. Once done, you can click Print a Test Page to confirm.

Congratulations 🎉 Your Epson M200 printer is now installed!

---

✅ Step 9: Install the Scanner Driver

Don’t forget the scanner — it needs its own driver.

1. Go to the extracted Scanner driver folder.
2. Double-click the Setup.exe (or installation application).
3. Accept the license → Click Next → Wait for installation.
4. Once completed, restart your PC.

Now your Epson M200 scanner will also be detected in Windows applications.

---

✅ Step 10: Verify and Test

To confirm everything works:

1. Open Printers & Scanners again.
2. Look for Epson M200 in the list.
3. Right-click → Print Test Page.
4. Open Windows Fax and Scan to test the scanner.

If both tests succeed, you’re ready to use your printer fully.

---

🔧 Troubleshooting Common Issues

Even with proper installation, you may encounter errors. Here are fixes:

• Printer not detected → Try a different USB port or cable.
• Scanner missing → Reinstall the scanner driver separately.
• INF file not found → Ensure you extracted the ZIP file first.
• Windows Update interfering → Disable automatic driver updates and reinstall manually.
• Test page fails → Uninstall, restart, and reinstall using a different port (USB002, USB003).

---

❓ Frequently Asked Questions

Q1: Does Epson M200 work with Windows 11?
Yes, by using the Windows 10 (64-bit) drivers from Epson’s official site.

Q2: Can I use it on a 32-bit machine?
Windows 11 is only 64-bit, so no. But Windows 10 32-bit drivers are available if you’re on older OS.

Q3: Do I need both printer and scanner drivers?
Yes, for full functionality. Without the scanner driver, only printing will work.

Q4: What if my printer still doesn’t respond?
Uninstall all Epson drivers, restart the PC, and reinstall following the manual method.

---

🏁 Conclusion

Installing the Epson M200 printer driver on Windows 11 may look tricky at first, especially since Windows 11 drivers aren’t directly listed on Epson’s website. But by carefully selecting the Windows 10 (64-bit) drivers, extracting the files, and manually pointing Windows to the INF file, you can have the printer and scanner fully working in less than 30 minutes.

This guide walked you through every step, plus offered solutions for common problems. With your Epson M200 now ready, you can get back to printing documents and scanning files without interruptions.

---

⚠️ Disclaimer

This guide is for educational purposes. Always download drivers directly from the official Epson website: https://www.epson.net. Avoid third-party sites to prevent malware or outdated software.

---

🏷️ Tags & Hashtags

Tags: Epson M200 driver, Epson M200 Windows 11, Epson printer installation, Epson scanner driver, install Epson printer manually

Hashtags: #EpsonM200 #PrinterDriver #Windows11 #EpsonPrinter #PrinterSetup #DriverInstallation

Sneha Rao

Sneha is a hardware reviewer and technology journalist. She has reviewed laptops and desktops for over 6 years, focusing on performance, design, and user experience. Previously working with a consumer tech magazine, she now brings her expertise to in-depth product reviews and comparisons.

Website · More from this author